Heating, Ventilation and Air Conditioning Product Manufacturers
Established in 1989, Air Handlers are manufacturers of Heating, Ventilating and Air Conditioning Equipment for the building services industry. Our state of the art facilities enable us to provide a complete design, estimating, manufacturing and testing service. Our in house sheet fabrication and finishing facility enables us to manufacture virtually limitless designs of bespoke air handling equipment. Read More...
Latest product development
Our standard range of Air2O Handlers fully integrated package systems have a capacity range of 1.0 to 15m³/sec airflow. Also a heat recovery device choice of thermal rotary wheel or plate heat exchanger.
How Air2o Works Please click for video
Direct Evaporative Cooling
With direct evaporative cooling, outside air is blown through a water-saturated medium (usually cellulose) and cooled by evaporation. The cooled air is circulated by a fan.
Direct evaporative cooling adds moisture to the air stream close to saturation. Then dry bulb temperature is reduced, while the wet bulb temperature stays the same.
Indirect Evaporative Cooling
With indirect evaporative cooling, a secondary air stream is cooled by water. The cooled secondary air stream goes through a heat exchanger, where it cools the primary air stream. The cooled primary air stream is circulated by a fan.
Indirect evaporative cooling does not add moisture to the primary air stream.
What is IDEC Evaporative Cooling?
- IDEC Evaporative Cooling is a 2 stage evaporative cooling system
- Using potable water – (or Grey Water)
- 1st stage water is cooled via a indirect heat exchanger allowing us to pre cool the air with no added moisture at approx.80% efficiency
- 2nd stage is a direct evaporative cooling section achieving 95% efficiency
- This Combination means we can achieve 125% cooling of the wet bulb temperature with approx.50% less moisture
- Provides superior performance than conventional direct evaporative cooling approaches
- Significant Energy Savings
- Water consumption is very low
- DX or chilled water can be incorporated (Hybrid)
How Air2o Works Please click for video
For information please contact Air Handlers Northern Sales Office on 0161 745 8888 or email sales@airhandlers.net
AHTW Packaged High Performance Energy Recovery Air Handling Unit with package controls.
Benefits
- High thermal efficiency thermal wheel
- Energy recovery up to 83%
- Backward curved high efficiency E.C. plug fan wall.
- Low specific fan power
- High sound reduction casework tested to BS EN ISO 10140-2 2010
AHPHX Packaged High Performance Energy Recovery Air Handling unit with packaged controls
Benefits
- High Efficiency plate heat exchanger
- Fitted summer face and by pass dampers
Insulated shut off damper
Benefits:
Constructed with aluminium aerofoil insulated blades with polyurethane foam tested in accordance with BS 7456 and having Class 1 surface spread of flame with a u value of 0.02w/m.
Dampers are constructed to low leakage specification with tight blade and edge seals
PVU Quiet Packaged Units
PVU Quiet Benefits
- Ultra low profile from 300mm
- Option bag filters to F7 grade
- Optional mixing box
- Matching attenuators
- Tonal noise control
- Speed regulation 0>10 Volts
- Heating coils - LPHW and electric
- Bottom and side access
- Fully integrated packaged controls
- Fan motor isolator fitted as standard
- High airflow / pressure performance
- Low specific fan power E.C. fans backward curved
- Constant pressure ‘Vari-Vol’ variable volume system available
- High sound reduction casework tested to BS EN ISO 10140-2(2010)
- Suspension brackets with vibration control available
- Cooling coils chilled water/DX/heatpump available
PVHRU Max Quiet Heat Recovery Units To ErP 2018
PVHRU Max Quiet Benefits
- Low profile from 300mm deep.
- Up to 90% Heat Recovery efficiency.
- Outperforms ErP 2018.
- Heating Coil options. LPHW or electric.
- Cooling coil options chilled water or DX.
- Heat pump coil options.
- TM52 compliant.
- On board controls available.
- Filtration to F7.
- Summer by pass facility.
- High sound reduction casework tested to BS EN ISO 10140-2 (2010) UKAS certified.
- High performance backward curved centrifugal fans with low specific fan power.
- Meets BB101 and BB93 Feb 2015.
- Bottom access.
Series VSI/VTI Single & Twin Low Profile Quiet Extract Fan Units
Benefits
- Low noise breakout
- High sound reduction casework tested to BS EN ISO 10140-2 (2010)
- Backward curved, low speed, EC fans
- Low SFP
- Tonal noise control
- Matching attenuators
- Weatherproof options
- Attenuators/cowls and acoustic louvre options
- Meets BB 93 Feb 2015
- Fan motor isolators fitted as standard
- Suspension brackets with vibration control available
- Speed regulation 0>10 Volts
- Variable volume control system - Vari Vol
- Auto change over control system for duty and stand by operation on VTI units
- Bottom and side access
Envirofresh and Classvent
Packaged units such as Envirofresh and Classvent units are pre commissioned at the factory prior to despatch. The units are factory pre-wired and complete with a comprehensive control system, to minimise on site installation time. All units provide full fresh air ventilation with a heat recovery device to increase the temperature of the incoming fresh air and are fully compliant with the European Directive ErP 2016 (Energy Related Products) for electrical engines and fans.
Application
- Combine with other systems such as VRV and chilled water fan coils to provide tempered fresh air.
- Where occupant fresh air requirement exceeds design cooling volume.
- Available with volumes from 0.5m3/s to 7.0m3/s
Acoustic Test Programme to BS EN ISO 10140 2:2010
During 2013 the company embarked on an Acoustic Test Programme for twenty different frame/panel systems and have them certified to BS EN ISO 10140 2:2010 International Standard Method for Measurement of Sound Test see Report 1429/2060
ErP Directive document 2016
Air Handlers are committed to the energy reduction commitments laid down by the Energy Related Products (ErP) Directive 2009/125/EC law which comes into force on 1st January 2016 with further changes on 1st January 2018.
Skidpak Products
Fully packaged Skid mounted gas fired heat pump unit with the air handling unit and heat pump condensing units mounted onto a common baseframe fabricated skid, with factory fitted refrigeration pipework and integral packaged controls, fully refrigerant charged and factory tested.
Fully packaged healthcare Skidpak unit constructed to HTM-03 with skid mounted air handling unit and packaged heat pump condensing unit with factory installed refrigerant pipework and packaged control system. Factory tested.
Envirofresh Quiet
click image to view internal components
Aura - Economax Unit
Click image to see refridgerant pipework